Kalta Wave Brewing Method Header

The Kalita Wave Brewing Method: A Complete Guide to Design, Extraction and Grind Size

How to Master the Kalita Wave Brewing Method

The Kalita Wave brewing method is a popular manual pour-over technique, valued for its distinctive flat-bottom design, simple operation and ability to produce a balanced, rounded cup of coffee. Unlike conical brewers, such as the Hario V60, the Kalita Wave uses three drainage holes and specially designed pleated paper filters to influence how water moves through the coffee bed.

Its design makes it an approachable choice for home brewers who want greater control over extraction without relying on complicated pouring patterns. Understanding how its geometry, filter design, grind size and water flow work together will help you produce a more consistent cup.

What are the mechanical design features of a Kalita Wave dripper?

Technical infographic chart with a Deep Cherry Red border detailing the flat-bottom geometry, three drainage holes, and pleated filters of the Kalita Wave coffee dripper

The Kalita Wave is a flat-bottom pour-over coffee dripper developed around three principal design features. Together, these influence water distribution, drainage and the contact between the paper filter and the brewer.

1. Flat-bottom geometry

Unlike a conical dripper, which directs water towards a central point, the Kalita Wave holds the coffee grounds in a relatively shallow, flat bed.

The Kalita Wave coffee brewing method

This arrangement encourages water to pass through a broader area of coffee rather than concentrating the flow towards the centre. When the grounds are distributed evenly and the pouring technique is controlled, the flat bed can help promote consistent extraction.

However, it does not eliminate channelling. Uneven pouring, poorly distributed grounds or excessive agitation can still create preferential pathways through the coffee.

2. Three drainage holes

The base of the Kalita Wave contains three small drainage holes. These allow brewed coffee to pass into the server beneath while influencing the rate at which the liquid leaves the coffee bed.

The holes form part of the brewer’s flow-control design, but they do not determine the drawdown time on their own. Grind size, filter paper, pouring rate, coffee dose and the quantity of water all contribute to the final drainage speed.

3. Pleated Wave filters

One of the most recognisable features is the specially designed Wave paper filter, with its distinctive pleated sides.

The folds reduce the amount of direct contact between the paper and the dripper walls. This helps maintain space around the filter and allows the brewer’s design to function as intended.

The filters are also shaped to fit the flat-bottomed brewing chamber, helping create a consistent bed for the coffee grounds.

The combination of the flat base, three drainage holes and pleated paper gives the Kalita Wave its distinctive brewing characteristics.

How does Kalita Wave extraction compare with a Hario V60?

The Kalita Wave and Hario V60 are both manual pour-over brewers, but their different geometries influence how water moves through the coffee.

The Hario V60 uses a steep, conical brewing chamber with a large central drainage opening. Its design gives the brewer considerable influence over water flow through pouring technique, making pour control particularly important.

The Kalita Wave uses a flat-bottomed bed and three drainage holes. Its design can make it more forgiving of small variations in pouring technique, although it still benefits from careful water distribution and a consistent pouring pattern.

In the cup, either brewer can produce excellent flavour clarity and sweetness. Differences in taste depend on the coffee, grind, recipe, water and brewing technique rather than the dripper alone.
So how do they compare?

FeatureKalita WaveHario V60
Brewing geometryFlat-bottomedConical
DrainageThree small holesLarge central opening
FilterPleated Wave paperConical paper
Pouring techniqueRelatively forgivingMore technique-dependent
Brewing characterOften balanced and roundedCan produce bright, clear cups

For beginners, the Kalita Wave offers a straightforward introduction to manual brewing. More experienced brewers can also use it to explore how small adjustments to grind size, pouring and water temperature influence extraction.

What is the ideal brewing recipe and grind size for a Kalita Wave 185?

What does 185 mean on a Kalita Wave dripper?

The number 185 identifies the larger size in the Kalita Wave range. It is not a reference to the drippers diameter or a measurement in millimetres, but a model designation used to distinguish it from the smaller Kalita Wave 155.

The two models are designed for different brewing quantities:

  • Kalita Wave 155: The smaller version, generally suited to brewing one cup or a smaller serving.
  • Kalita Wave 185: The larger version, designed for brewing approximately two to four cups, depending on the coffee dose and serving size.

Each model requires its corresponding Wave paper filter, as the filters are shaped to fit the different brewing chambers.

For home brewers, the 185 is a versatile option when preparing a larger single serving or enough coffee to share.

A good starting point is a medium grind, a coffee-to-water ratio of approximately 1:16 and water heated to between 93°C and 96°C.

  • Coffee dose: 20g of freshly ground coffee.
  • Water weight: 320g.
  • Coffee-to-water ratio: 1:16.
  • Grind size: Medium, similar in appearance to granulated sugar.
  • Water temperature: 93°C–96°C.
  • Bloom: Approximately 30–45 seconds.
  • Target brew time: Around 2:45–3:30 minutes, including drawdown.

These measurements provide a starting point rather than a fixed standard. Different coffees, grinders and filters can produce different results, so adjust the recipe according to taste.

Why does grind size matter?

Grind size determines the surface area of the coffee exposed to water and influences how quickly water moves through the coffee bed.

A finer grind exposes more surface area and will generally slow drainage while increasing extraction. A coarser grind exposes less surface area and usually allows water to pass through more quickly.

If your coffee tastes sharp, thin or underdeveloped, try grinding slightly finer. If it tastes excessively bitter, dry or harsh, try a coarser setting.

The suggested 900-micron measurement in your original recipe is not a universal Kalita Wave specification. Grinder settings and particle distributions vary considerably, so taste and brew behaviour are more useful guides than relying on one precise micron figure.

How to brew coffee using a Kalita Wave 185

Once you have your equipment and ingredients ready, follow this straightforward brewing sequence.

What you will need:

  • Kalita Wave 185 dripper.
  • Matching Kalita Wave 185 paper filter.
  • 20g freshly roasted coffee beans.
  • 320g filtered water.
  • Burr grinder.
  • Gooseneck kettle.
  • Digital scales.
  • Timer.
  • Coffee server or suitable cup.

Step 1: Prepare the filter

Place the Wave paper filter inside the dripper, ensuring that its pleated sides sit evenly against the brewer.

Rinse the paper thoroughly with hot water. This removes much of the papery taste and preheats the dripper and server.

Discard the rinse water before adding the coffee.

Step 2: Grind and distribute the coffee

Weigh out 20g of coffee beans and grind them to a medium consistency.

Transfer the grounds into the filter and gently shake the dripper to create an even, level coffee bed. This helps water make contact with the grounds more consistently.

Step 3: Begin the bloom

Place the dripper and server on your scales and tare to zero.

Start your timer and pour approximately 40–50g of water over the coffee, ensuring that all the grounds are thoroughly saturated.

Allow the coffee to bloom for 30–45 seconds. During this stage, trapped carbon dioxide escapes from the grounds, helping water make more even contact with the coffee.

Step 4: Continue pouring

After the bloom, gradually add the remaining water using a gentle, controlled circular motion.

You can divide the remaining water into two or three pours, allowing the water level to fall slightly between additions.

Avoid pouring aggressively against the filter walls. The aim is to keep the coffee bed evenly saturated without disturbing it excessively.

Continue until your scales show a total water weight of 320g.

Step 5: Allow the coffee to drain

Once the final pour is complete, allow the remaining water to pass through the coffee bed.

A total brew time of approximately 2:45–3:30 minutes is a useful starting target, although the ideal time will vary with the coffee and your brewing technique.

Remove the dripper, give the brewed coffee a gentle swirl to mix the liquid, and serve.

How do you troubleshoot a bitter or sour cup on a Kalita Wave?

Even with its forgiving design, the Kalita Wave can produce an unbalanced cup if the grind size, water temperature or pouring technique is not suited to the coffee.

Understanding the difference between under-extraction and over-extraction makes it easier to identify what needs adjusting.

Sour and thin coffee: possible under-extraction

If your coffee tastes unpleasantly sharp, sour or watery, it may be under-extracted.

This can happen when the grind is too coarse, the water temperature is too low or the brewing process is too short.

How to improve it:

  • Grind slightly finer to increase the surface area exposed to water.
  • Increase the water temperature slightly, if appropriate for the coffee.
  • Check that all the grounds are being saturated during the bloom.
  • Use a more consistent pouring pattern.

If you would like to understand the causes in greater detail, our guide explains why coffee tastes sour and how to fix it.

Bitter and dry coffee: possible over-extraction

An excessively bitter, harsh or drying cup can indicate over-extraction, although roast level and bean characteristics can also contribute to bitterness.

How to improve it:

  • Try a slightly coarser grind to reduce extraction.
  • Lower the water temperature slightly.
  • Reduce excessive agitation during pouring.
  • Check whether your brewing time is unusually long.

Slow drainage or a stalled brew

If water takes considerably longer than expected to pass through the coffee bed, several factors may be responsible.

Very fine coffee particles can collect around the filter and restrict drainage. A filter that is poorly positioned, an overly fine grind or excessive agitation can also contribute.

How to improve it:

  • Adjust the grind slightly coarser.
  • Use a steady, gentle pouring technique.
  • Avoid unnecessary stirring or aggressive swirling.
  • Check that you are using the correct Wave filter for your dripper.

Remember that a longer brew time does not automatically mean the coffee will taste bitter, just as a shorter brew does not guarantee sourness. Taste should always guide your adjustments.

Final thoughts: why choose the Kalita Wave?

The Kalita Wave combines a practical flat-bottom design with specially shaped paper filters and three drainage holes to create a distinctive approach to manual coffee brewing.

Its relatively forgiving nature makes it an excellent choice for beginners, while its ability to respond to adjustments in grind size, water temperature and pouring technique gives experienced brewers plenty of room to experiment.

Whether you are exploring the sweetness of a naturally processed coffee or looking for a balanced everyday brew, the Kalita Wave is a versatile addition to any home coffee setup.

The secret is not to follow a recipe blindly. Start with a consistent method, pay attention to the flavour in your cup and make small adjustments until you discover the balance you enjoy most.

Compare the Kalita Wave to other Brewing Methods

Scroll to Top
Portrait of the founder of The Coffee Guide

Meet the Founder

Hi, I'm the founder of The Coffee Guide. My passion for the bean is backed by a professional career in commercial catering and hands-on experience owning and operating a brick-and-mortar coffee shop. After years of working behind the counter, selecting roasts, and serving real communities, I built this platform to share authentic, field-tested brewing insights with home baristas worldwide.